Publications
4. Sporopollenin Capsules as Biomimetic Templates for the Synthesis of Hydroxyapatite and β-TCP
De Mori, A., Quizon, D., Dalton, H., Yavuzyegit, B., Cerri, G., Antonijevic, M., & Roldo, M. (2024). Sporopollenin Capsules as Biomimetic Templates for the Synthesis of Hydroxyapatite and β-TCP. Biomimetics, 9(3), 159.
3. Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions
Yavuzyegit, B., Karali, A., De Mori, A., Smith, N., Usov, S., Shashkov, P., … & Blunn, G. (2024). Evaluation of Corrosion Performance of AZ31 Mg Alloy in Physiological and Highly Corrosive Solutions. ACS Applied Bio Materials
2. Mapping plastic deformation mechanisms in AZ31 magnesium alloy at the nanoscale
1. Effect of micro blasting process parameters on 3D surface topography and surface properties of zirconia (Y-TZP) ceramics
Congress
14. Effects of Standoff Distance and Processing Duration Parameters On Primary Deformation Zone in Water Jet Peening Of Ti6al4v Alloy
Armağan M., Çalım E., Yavuzyeğit B., Yildiran Avcu Y., Abakay E., Avcu E. 8. Asia Pacific International Modern Sciences Congress, New Delhi, India, 11 – 12 September 2023
13. Enhanced Corrosion Resistance of the AZ31 Magnesium Alloy with Electrochemical Oxidised (ECO) Ceramic Coatings
Berzah Yavuzyegit, Katerina Karali, Arianna DeMori, Roxane Bonithon, Nigel Smith, Pavel Shashkov, Gordon Blunn, 2023, 33rd Annual Conference of the European Society for Biomaterials (ESB2023), Davos, Switzerland
12. Grain Scale Strain Mapping of Deformation in Mg Alloys at Room and Elevated Temperatures by High Resolution Digital Image Correlation
Withers P., Yavuzyeğit B., Fonseca J., Smith A., Donoghue J., Lunt D., 17th International Conference on Advances in Experimental Mechanics, Glasgow, England, 30 August – 01 September 2023
11. Corrosion Behaviour of a Coated AZ31 Mg Alloy under Static and Cyclic Loading in Four Point Bending Tests
B. Yavuzyegit, K. Karali, R. Bonithon, N. Smith, P. Shashkov, and G. Blunn, 2023, 14th International Conference on Advances in Experimental Mechanics, Glasgow, UK
10. An in situ study of deformation mechanisms in AZ31 and WE43 Mg alloy at elevated temperatures
Berzah Yavuzyegit, Egemen Avcu, Albert D. Smith, Jack Donoghue, David Lunt, Joseph D. Robson, Timothy L. Burnett, Joao Q. da Fonseca, and Philip J. Withers, 2022, ICSMA19, International Conference on Strength of Materials, Metz, France
9. An in-situ study of grain boundary migration and sliding in AZ31 magnesium at elevated temperatures
Berzah Yavuzyegit, Egemen Avcu, Albert D. Smith, Jack Donoghue, David Lunt, Joseph D. Robson, Timothy L. Burnett, Joao Q. da Fonseca, and Philip J. Withers, 2022, Junior Euromat 2022, Coimbra, Portugal.
8. Fully automated small-scale thermomechanical testing in-situ within an SEM for increased temporal resolution
Albert Smith, Jack Donoghue, Antoine Candeas, Fabrice Martinez, David Lunt, Berzah Yavuzyegit, Philip Withers, Michael Preuss, 2022, 18th European Mechanics of Materials Conference (EMMC18), Oxford, UK.
7. Creep Deformation Mechanisms of AZ31 and WE43 Magnesium Alloys at Room Temperature by High Resolution Digital Image Correlation
Berzah Yavuzyegit, Philip J. Withers, Timothy L. Burnett, 2019, , PGR Conference, School of Materials, Manchester, The University of Manchester, UK.
6. Creep Deformation Mechanisms of AZ31 Magnesium Alloys at Room Temperature by High Resolution Digital Image Correlation
Berzah Yavuzyegit, Egemen Avcu, Jack Donoghue, Albert D. Smith, David Lunt, Joseph D. Robson, Timothy L. Burnett, and Philip J. Withers, 2018, 14th International Conference on Advances in Experimental Mechanics, Belfast, UK.
5. Creep Deformation Mechanisms of AZ31 Magnesium Alloys at Room Temperature by High Resolution Digital Image Correlation
Berzah Yavuzyegit, Philip J. Withers, Timothy L. Burnett, 2018, PGR Conference, School of Materials, The University of Manchester, UK
4. The effects of acceleration pressure and particle impingement angle on the 3D surface topography and the surface properties in the preparation process of monolithic zirconias with micro sand blasting
3. The effects of acceleration pressure and particle impingement angle on the 3D surface topography and the surface properties in the preparation process of monolithic zirconias with micro sand blasting
Okan Yetik, Berzah Yavuzyeğit, Yasemin Yildiran, Gural Pekkan, Serkan Sarıdağ, Egemen Avcu, 16th International Materials Symposium (IMSP’2016), Denizli, Turkey, 12-14 October 2016
2. The effects of shot peening parameters on the surface roughness of the Ti6Al4V alloy
Yasemin Yildiran, Okan Yetik, Berzah Yavuzyegit, Egemen Avcu, 16th International Materials Symposium (IMSP’2016), Denizli, Turkey, 12-14 October 2016
1. The effects of erodent particle size and acceleration pressure on the 3d surface topography and the surface properties in the preparation process of conventional Zirconias with micro sand blasting
Berzah Yavuzyegit, Okan Yetik, Yasemin Yildiran, Gural Pekkan, Serkan Sarıdağ, Egemen Avcu, 16th International Materials Symposium (IMSP’2016), Denizli, Turkey, 12-14 October 2016
Thesis
2. Investigation of the Deformation Mechanisms of Magnesium Alloys at Room Temperature and Elevated Temperature
Berzah Yavuzyegit, Supervisor: Prof Philip J Withers and Prof Timothy Burnett, PhD Thesis, the University of Manchester, 2023
1. Investigation of Kink Bands Formation under Compression in Carbon Fibre Reinforced Composites
Berzah Yavuzyegit, Supervisor: Prof Philip J Withers and Dr Egemen Avcu, MSc Thesis, the University of Manchester, 2017